Are you no longer fond of handling so many keys in your hand all the time? Is it hard for you to handle the bunch of keys all the time? If yes, then the best solution you can go for is related to the rekey locks of your house. And trust me, if you think that the process to rekey locks is a bit complex, you’re mistaken about it.

In this guide, we are explaining to you with step by step guide on how you can rekey locks of your house without any hassle.

Step by Step Tutorial on How to Follow on How to Rekey Locks

Step 1: Removing the Doorknob

First of all, you will be removing the doorknob from the main door. To perform this rekey locks step, you have to align the holes in the cylinder by making it turn into the counterclockwise rotation. You can often get it to insert up and let the key be turned up as a quarter towards the right. Once the holes of keys are hence fully aligned up, you have to insert the primary remover tool and press it. But make sure that it is separated from the shank.

Step 2: Removing the Cylinder

As soon as you remove the knob from the locks, now you have to remove off the cylinder from inside. If the rekey knob has a cap over its back, you need to remove it using a suitable tool. After that, you hence have to push the cylinder free from the front to the back.

Step 3: Take off the C-Clip

Now you have to remove off the c-clip, which is holding the cylinder in one place.

Step 4: Attachment of Key Plug

You have to remove the rekey locks key plug from the housing using the follower tube, which is already part of the main kit. Attach the plug at the backside of the cylinder and hence let the key get inserted up into the lock. Some of the rekey hence require you to turn it in the direction of 45-degrees.

Step 5: Dump of the Old Pins

In the next step, you have to dump the pins into the plug. Remove off the old rekey locks and insert your new key.

Step 6: Inserting New Pins

Insertion of the new pins is all indicated through the rekey locks kit’s instructions. Ensure that they are hence fly over the top of the plug.

Step 7: Replacement of the Plug

Replace the main rekey locks plug into the cylinder by slowly pushing the plug follower as it goes away. Once you have inserted it, you have to hence try the key and confirm that it does turn.

Step 8: Reattachment of Knob to the Door

Reinsert the main cylinder into the rekey locks knob and then reattach the main knob with the door.

Step 9: Testing of the Lock

Once you feel that everything is now fully assembled, you have to hence test the lock once.

Conclusion

Follow the step-by-step guide we have shared with you and perform the rekey locks procedure to make it happen successfully in your way. Please do it now and see how it works!

Check out our other services